EPOS ELS MINI MONITOR SPEAKERS
The first in a line of lower cost speakers released by Epos, the ELS 3 mini monitor maintained the high standards expected of any product bearing the Epos name.
Designed not only for high performance two channel operation, these competitively priced Epos speakers further satisfy a requirement in the 5.1 home cinema market, ensuring there is no need to compromise the audio quality in the name of home entertainment.
Utilising a two-way bass reflex design, the ELS 3 incorporates a 130mm woofer with injection moulded polypropylene cone with dust cap and rubber rolled surround on a heavy die-cast aluminium chassis. It has a dual magnet and shielding can, further enhancing its use in a home theatre application.
The 25mm aluminium dome neodymium tweeter is an entirely new Epos design and features the Epos logo directly moulded onto the faceplate. In true Epos style, the ELS 3 has a minimalistic crossover.
In a deviation from the Epos real wood veneer cabinet, this new ELS 3 cabinet features a vinyl wrap finish allowing the cost to be highly competitive. The choice of three colours remains, enabling the addition of these speakers to complement earlier models, should they be desired for use in a rear channel application.
As you would expect from the manufacturer of such a well-respected brand, the exciting Epos ELS 3 has a performance level that has to be heard to be believed.
SPECIFICATIONS
| Power Handling: | l00 Watts speech and music |
| Configuration: | 2 way |
| Frequency Response: | 65 Hz - 20 kHz |
| Impedance: | 4 Ohm nominal |
| Sensitivity: | 87 dB @ 1W/lm |
| Amplifier Compatibility: | 25 - l00 Watt |
| Positioning: | 20 -50cm from a rear wall |
| Bass Driver: | 130 mm polymer cone with 25mm high temperature voice coil, injection moulded polypropylene cone mounted on an inert die-cast aluminium chassis |
| Tweeter: | 25 mm aluminium dome with high temperature voice coil and neodymium shielded magnet system |
| Crossover: | Bass driver crossover is achieved by 3 components in a 2nd order filter and tweeter uses 4 components in a 3rd order filter at 3kHz crossover |
| Cabinet: | 12 mm HD chipboard wrap and 25mm MDF front baffle with vinyl wood finish |
| Finishes: | Light Cherry, Dark Cherry, or Black Ash |
| Grille: | Fabric |
| Size (H x W x D) mm | 270 x 174 x 195 |
| Weight: |
4.5kg
per single speaker
10.5 kg boxed gross (pair)
|